Overview

The series pipeline pump is pressurized pipeline transportation, pipeline pressure is too low to resolve the development of new pumps, horizontal centrifugal pump than the current application has great advantages. As a result of advanced mechanical seal, impeller mounted directly to the motor shaft, so the high efficiency, low power consumption, compact structure, small size, light weight, easy decoration, etc., can be used in tandem according to need and lift and flow.

Signification of Model

Usage

◆ SG ordinary series pipeline pump for high-rise building pressurized water, garden irrigation, cooling towers, Sheung Shui, long-distance water, air conditioning, refrigeration flushing, bathroom and other warm and cold pressurized water cycle. Use a temperature below 80 ℃.

◆ SGR series pipeline pump hot water for heating, hot water boilers and other industries boost circulation. Using a temperature below 150 ℃.

◆ SGP decay series pipeline pump for conveying the food, pharmaceutical, brewery, chemical and other process industries in the corrosive medium, use a temperature below 100 ℃.

◆ SGB series of explosion-proof pipeline pump for conveying non-corrosive liquid, methane or coal mines and factories class fixed equipment Ⅰ Ⅱa, Ⅱb level, temperature class t1, t2, t3, t4 group there is an explosive mixture of other industrial sites . Use a temperature below 80 ℃.

◆ SGPG series corrosion-proof pipeline pump for conveying chemicals, pharmaceuticals, petroleum, food, defense and other industrial corrosive liquid methane or coal mines and factories class fixed equipment Ⅰ Ⅱa, Ⅱb level, temperature class t1, t2 , t3, t4 group there is an explosive mixture of other industrial sites. Using a temperature below 150 ℃.

Working Conditions

◆ Inlet pipe pressure is not greater than 3kg/cm³, not less than 0.2kg/cm³, the water quality of water, there should be solid particles or fibers, hot water should be soft; medium temperature: not lower than 0℃; ambient temperature but ± 45℃; supply voltage 380v, part 220v.

Parameters

Dimensions

Structure As shown: The pump motor and pump from the two parts. Vertical motor is derived motor; pump by the pump, impeller, mechanical seals and other parts. Its connection process is: Motor ① extended shaft connected mechanical seal ④, impeller ③, and washer ⑤ and nut ⑥ fastening; Between the pump body ② and the motor cover plus an "o" -type seal, and then bolts the two firmly connected; Between the pump and the motor with a sealed water ring separated to prevent water leakage, to protect the safe operation of the motor.

Installation size